Gun head holder for handheld tape binding machine

【Equipment characteristics】：
1. Automatic feeding, perforating, tensioning, tail cutting, waste recycling, within 1 second, compared with manual bundling efficiency at least about 4 times;
2. The device is equipped with a gun head fixing bracket, the strapping mouth can be selected up or down by itself, and the automatic strapping action can be triggered by foot or induction to free the hands of employees and make it easier to comb the products. The bracket can be removed by itself when different products are needed.
3. The new structure is more compatible with the cable tie quality process, and almost all the cable ties that can be fed through the vibration disk can be used normally;
4. Touch screen has automatic counting function, the machine will automatically record the number of tied ties (displayed on the touch screen);
5. The size of the ring mouth of the cable tie can be adjusted and controlled by the touch screen, and the tightening force of the cable tie can be adjusted and controlled by the screw;
6. The dual-wheel structure for material feeding is independently developed. When the gun head's material feeding wheel gets stuck or blocked, it can automatically remove the blockage by reversing the gears;
7. The equipment has a variety of automatic detection functions, with the I/O interface can display the running status of various parameters in real time, once the machine is found abnormal, the machine will immediately alarm and stop running, the material tube plug fault can be automatically eliminated, after discharge, press the trigger to automatically start running, the feeding fault needs to be manually eliminated, the machine is also equipped with a manual mode, which can run a certain part separately to monitor each operation;
8. The equipment is equipped with a temperature control system to improve the brittleness of the cable ties in low temperature conditions in winter, effectively avoiding the head shot or fracture of the cable ties;
9. When the conventional specification equipment is in normal operation, the distance from the noise source is 1-1.5 meters, and the noise is only about 75 decibels;
10. The important parts of the equipment have safety marks, and the equipment has multiple security devices;